Leave Your Message
Full automatic Frozen whole chicken packaging package machine
Products

Full automatic Frozen whole chicken packaging package machine

This production system uses the AF4000 four-section belt conveyor as the feeding equipment and the SE-5700BX series pillow packaging machine to form an automatic packaging production line that can be connected to the production line.

The device configuration diagram is as follows:

    System details

    According to the functional requirements of the production line, the following equipment module list is listed: 

    No

    Device name 

    Function description

    Remark

    1

    AF4000 Four-section belt conveyor

    Through the cooperation of sensors and servo motors, different positions and speeds of the product are controlled to ensure that the product enters the packaging machine conveyor belt smoothly.

     

    2

    SE5700BX pillow packaging machine

    Including: conveyor belt-belt pusher, film supply system, body part, and outer bag packaging of continuous products.

     

    description2

    1. Technical overview of each equipment

    Equipment composition
    According to functional requirements, it consists of the following parts:
    Table 2-4 List of components of the complete machine

    No

    Name

    Qty

    unit

    Functional Description

    1

    conveyor

    1

    set

    Stainless steel push rods are used to convey the product into the film wrapping machine at fixed intervals.

    2

    Automatic film splicing device (optional)

    1

    set

    When the film roll is used up, the tail end of the film roll and the front end of the spare film roll are automatically bonded to ensure that the film can be changed without stopping the machine.

    3

    Automatic film supply system

    1

    set

    Single film roll, to ensure uniform film feeding at set speed.

    4

    Bag making machine & center sealing

    1

    set

    Cooperating with the film feeding system, the roll film is automatically formed into a tube and the two sides of the roll film are sealed by three sets of heating rollers.

    5

    belt device

    1

    set

    After the film passes through the bag maker, the lower finishing belt drags the film and the product to run, and the upper finishing belt tidies the surface of the film to ensure beautiful sealing.

    6

    sealing device

    1

    set

    It can realize the sealing and cutting functions at both ends of the film and output the packaged products independently.

    Technical parameters:


    Functional project requirements

    illustrate

    Production speed

    30-50packs/min (depending on product condition) Speed can be adjusted continuously on the touch screen

    Maximum film drawing speed

    40-50 m/min

    Packaging film width

    Max. 450mm

    Cutting length

    90-400mm

    Product size

    Maximum width 200mm, maximum height 100mm, depending on product specifications

    Voltage

    3-phase 380V

    power

    Packaging machine: 4KW

    Gas source

    0.5-0.6MPa inlet equipped with residual pressure relief valve, pressure reducing filter, water separator

    Gas consumption

    30L/min

    Packaging machine actual photos: 

    • 5
    • package machine
    detail

    Make An Free Consultant

    Your Name*

    Phone Number

    Country

    Remarks*